KAYAK FISHING ACCESSORIES
FISH FINDERS AND ACCESSORIES
HUMMINBIRD 570 FISH FINDER
The Humminbird 570 is new for 2010. The 16 level grayscale high resolution 640V X 320H pixel 5 inch display with Dual Beam technology provides superior target identification in an affordable unit. The waterproof 570 is not an entry level unit that you will be looking to upgrade anytime soon. I highly recommend this unit for those yak anglers that do not require color, GPS or chart plotting. Check out some the features on the following links:
ADVANCED SONAR FEATURES
ITEM NUMBER: HB 570-1
ITEM DESCRIPTION: HUMMINBIRD 570 FF
TRANSDUCER MOUNTING KIT
The new Humminbird Kayak Transducer Mounting Kit is in stock and ready for shipment. This kit will eliminate all the issues involved in mounting your Sonar/Fishfinder transducer inside the hull. The kit is complete with EVERYTHING required for installation. No longer will you have to find the right type of foam, goop, etc. to do the installation. Included in the kit is a semi-rigid plastic bracket for the transducer, an adhesive backing for the bracket, a scuff pad, environmentally friendly marine "grease" used to seal the transducer to the hull, and a cleaner/primer to prep the hull for the adhesive used on the adapter. There is also a hook and loop strap to secure the transducer in the adapter. Of course, there are complete instructions with illustrations. Please read these instructions before you begin installation. Click here for a short video of how to use this kit. Please excuse the noise in the video. It was shot next to an airport not in a war zone.
Compatible with the following Humminbird products:
100 Series - All Units
300 Series - All Units
500 Series 525,535,565,580,585c,595c,586c,587c,596c,597c
700 Series 717,727,767,747c,757c,777c2,787c2,778c,788c
900 Series 917
IN STOCK - READY TO SHIP
ITEM NUMBER: HBTMK-1
NEW NEW NEW
New In Hull Transducer Mounting Kit
For Humminbird Fish Finders with Down Imaging T-Ducers
FOR USE WITH
ITEM NAME: TRANSDUCER MOUNTING KIT
ITEM NUMBER: MHX XMK DI
NEW! NEW! NEW!
This cable deck seal is a bit more user friendly than the ones shown below. It comes with pre-drilled inserts in a couple of different cable sizes and includes a blank insert for those who may require it for multiple cables. Completely waterproof method of passing cable(s) thru your kayaks hull/deck. The body is structural plastic with a rubber insert. All fasteners are included.
Small - connectors up to 21 mm (0.83"). Cables from 4-9 mm (0.165"-0.35").
Medium - connectors up to 40mm (1.57"). Cables from 12-15mm (0.47"-0.59").
Item Name: Deck Seal, Small
Item Number: DSS-1
USED TO WATERPROOF CABLES PASSING THRU HULL
These Cable Clams are a great way to provide a waterproof method of running a cable thru the hull without having to remove the connectors. The Cable Clams come in three sizes that will accommodate most of the popular FF/Sonar/GPS/Chartplotter cable connectors. All sizes can be used for multiple cables if required. The rubber block is NOT pre-drilled for the cable diameter allowing the user to precisely fit each application. The body of the Cable Clam is made of Acetal (structural plastic), the seal and gasket material is UV-Stabilized Buna-N Rubber, and the fasteners are Stainless Steel. Complete installation instructions are included on the packaging. Three sizes are available:
SMALL - MAX CONNECTOR DIAMETER/WIDTH = .680 INCHES
MEDIUM - MAX CONNECTOR DIAMETER/WIDTH = .834 INCHES
LARGE - MAX CONNECTOR DIAMETER/WITH = 1.396 INCHES
The outside diameter is:
SMALL - 1 5/8 INCHES
MEDIUM - 1 15/16 INCHES
LARGE - 2 1/2 INCHES