KAYAK FISHING ACCESSORIES
ROD HOLDERS AND MOUNTS
Because of the way the shopping cart shipping charges have to be structured, there is sometimes what seems like and is too much charged for shipping. If the shopping cart shipping charges significantly exceed actual cost of shipping and handling the difference will be refunded to you.
The shopping cart is set up for shipping to the Continental US only. Please contact CDE for INTERNATIONAL shipping costs PRIOR to placing your order.
A PayPal account is not required to use your Credit Card to pay for your order through PayPal. Your Credit Card info is not made available to CDE when using Pay Pal. It is a very secure method of payment. There are no additional charges to you for using PayPal.
Scotty Bait Cast/Spinning Rod Holder No.280 Holds a bait caster reel in a cushioned cradle. A slot in the front of the rod holder allows for a spinning reel to be securely held in place. Pistol grip rod butts and trigger stick butts are securely held in this versatile rod holder. Constructed of non-corrosive materials. Don't forget mounting hardware, FKS-4, and silicone adhesive/sealer, 66BR. A standard for kayak fishing. Includes a No: 241 Mount.Item Name: SCOTTY BAITCAST/SPINNING ROD HOLDER
Item Number: NO: 280
Price: $20.95 REDUCED TO $18.00
Scotty No. 281 Bait Cast/Spinning Rod Holder (SAME AS THE 280) except it comes with a Scotty No. 244 Flush Deck Mounting Bracket. The 244 fits in the recess of most kayaks with a console between your feet. Can be mounted with rivets, RIV-10L. Leaves the deck clear when the rod holder is removed.Item Name: Scotty No. 281 Rod Holder
Item Number: No. 281
Price: $22.95 REDUCED TO $22.00
The Scotty 388 comes with a 280 Rod Holder, a 459 Extender, and a 428 Gear Head. This combo allows the ultimate in adjustability for positioning your rods.
Item Name: Scotty Combo
Item Number: No. 388
Scotty Powerlock Rod Holder No, 230 and 231. This rod holder is stronger and more secure than the Scotty No. 280 and therefore a better choice for those yak anglers who are venturing offshore to troll for Kingfish, Bonita, etc. You fresh water yak anglers targeting big Stripers should take a look at this rod holder. This is basically for baitcasting/trolling reels, however it will hold a spinning rod by inserting it reel up. The positive locking front collar will prevent rod and reel loss when you get a strike. The No. 230 comes with a No.241 Base and the No. 231 comes with a No. 244 Flush Mount.Item Name: SCOTTY NO. 230
Item Number: No. 230
Price: $23.95 REDUCED TO $19.00
Item Name: SCOTTY NO. 231
Scotty Fly Rod Holder No.265 Fully adjustable, multiple positioning. Includes side or deck No: 241 mounting bracket. Engineered with rugged non-corrosive materials. Don't forget mounting hardware, FKS-4, and silicone adhesive/sealer, 66BR. Makes your kayak fishing with a fly outfit much easier.Item Name: SCOTTY FLYROD HOLDER
Item Number: NO. 265
Price: $22.95 REDUCED TO 21.00
Scotty Fly Rod Holder No.264 comes with a No.244 Rectangular Flush Mount. Otherwise same as No.265. Can be mounted with RIV-10 Long Rivets.Item Name: SCOTTY FLYROD HOLDER
Item Number: NO:264
Price: $24.95 REDUCED TO $24.00
SCOTTY 476 ROCKET LAUNCHER ROD HOLDER
Kayak anglers have been asking for this Scotty 476 Rocket Launcher. It is now available and in stock. The 476 comes with a 241L locking base and like all Scotty products is made of high strength composite material. Saltwater corrosion is never a concern with Scotty products. The tube portion is approximately 9 3/4 inches in length with an inside diameter of 1 3/4 inches. There are drain holes in the bottom along with a gimbal locking bar for rods with gimbal butts.
Item Number: Scotty 476
Item Name: Scotty Rocket Launcher
Scotty Triple Rod Holder No.257. (New Style-Not w/flat bar) Mounts three Scotty Rod Holders onto one mounting bracket. Made from re-enforced Nylon and Stainless Steel - includes stainless steel fastenings. The Scotty Fishfinder Mount No.272 may also be used to add GPS or a Fishfinder to the Triple Rod Holder. There are slots for lures and knives, etc. Don't forget mounting hardware, FKS-4, and silicone adhesive/sealer, 66BR.
Item Name: SCOTTY TRIPLE ROD HOLDER MOUNT
Scotty Flush Deck Mounting Bracket No.244S. A low profile (1/4 " high) rod holder bracket that can be used to mount Scotty Rod Holders to reduce weight and and achieve a lower profile. A rain/splash plug is built in to the mount and the bottom is sealed. This bracket can be mounted with 3/16" anodized rivets or ss fasteners. Don't forget to use silicone adhesive/sealer, 66BR.Item Name: SCOTTY FLUSH DECK MOUNTING BRACKET
Item Number: NO. 244S
Scotty Round Flush Deck Mounting Bracket No. 344. Sealed base for watertight applications. For use with all Scotty Rod Holders and Accessories. The 344 can be mounted with SS bolts and nuts or with 3/16 inch anodized rivets. The 344 provides a clean deck when the rod holders are removed. A plus for you fly fishermen. Excellent choice for the Prowler and Prowler 13. Fasteners are not included.
Item Name: Scotty Round Flush Deck Mount Item Number: NO. 344 Price: $12.50
Scotty Compact Threaded Deck Mount No. 444. This new mount is designed to fit in a smaller space than the other Scotty Mounts. The diameter is only 2 3/8 inches. You must have access to the inside of your yak to mount the No. 444. You will need a 1 1/4" hole saw and 5/16" drill bit for installation. The 444 comes with a rain cap and bottom cap. Be sure to use sealant under the top flange to ensure a watertight seal. Installation instructionsItem Name: SCOTTY NO. 444
Item Number: No. 444
Scotty Gimbal Mount No. 253 allows you to use Scotty Rod Holders when your kayak has flush mounted rod holders. No more holes to drill or modifications to your kayak necessary. The Gimbal Mount just inserts into your existing flush mount and then any Scotty Rod Holder can be used. This will get your expensive reels up higher and less likely to be soaked with water. Easily removed to use the flush mounts for trolling larger rods if fishing off the beach.
Item Number: SCOTTY NO: 253
Scotty 254 SS 8.5" Extension. Works well with the Triple Mount or any of the Scotty Rod Holders where extra strength is needed.
Item Name: Scotty 254 Extender
Item Number: Scotty 254
PRICE REDUCED TO $22.50
Scotty Rod Holder Extender No. 259. Works great when used with the Scotty Flush Mounts No. 244 or No. 344 to get your reels up higher away from possible splash. Also allows a more vertical orientation of the Scotty No. 280 Rod Holder. When used with a console mounted rod holder the Extender moves the rod closed to you for easier and quicker use. Lightweight nylon construction. This extender raises your rod holder 6 1/2 inches.
Item Name: Rod Holder Extender Item Number: NO. 259 Price: $11.00
The new Scotty Adjustable Rod Holder Extender, Number 459, allows you to adjust the position of any rod holder used with it. The length is 9 1/2 inches and the 459 comes with an additional attachment bolt. The adjustment feature allows you to better position rod holders for easy reach.
You can see the Scotty 459 Extender in use with the Scotty 344 Round Flush Mounts on this CaptDick Edition Prowler Big Game. Note, also, the 254M Extender used with a Scotty 244 Rectangular Flush Mount on the center console cover. All of the Scotty Rod Holders are compatible with the 459 and 254M Extenders.
Item Name: Scotty Extender
Item Number: 459
The Scotty 459M is a shorter version of the 459 shown above. Length of the 459M is 4 1/2 inches.
Item Name: Scotty Extender
Item Number: 459M
The Scotty 429 is a 459 Extender with a 428 Gear Head Mount. Fits any Scotty base mount and allows complete position adjustment.
Item Name: Gear Head Extender
Item Number: No. 429
Item Price: $24.50
Scotty Mini Rod Holder Extender NO: 254M is made from structural nylon for corrosion prevention. The 254M will raise your rod holder 4 1/4 inches. Works with all Scotty mounts. Especially useful to clear your feet when using the Scotty Triple Mount.
Item Name: Mini Rod Holder Extender
Item Number: NO: 254M
Scotty 428 Gear Head Mount. The Scotty Gear Head Mount provides a quick and easy drop and lock system. It allows you to secure and reposition your rod holder with a quick twist of the gear head. For use with all Scotty post mount rod holders. Manufactured engineering grade, fiber reinforced nylon for extra strength and corrosion resistance. This mount allows you unlimited positioning of your rod holder.
Item Name: Scotty Gear Head
Item Number: Scotty 428
Scotty Fishfinder Mount No.269. For Lowrance, Eagle and most Garmin fishfinders. For other brands-drill the bracket supplied with your fishfinder to match the Scotty bolt pattern. Most handheld GPS mounts can also be used by drilling to match bolt patterns. Constructed of non-corrosive materials. Don't forget mounting hardware, FKS-4, and silicone adhesive/sealer, 66BR.Item Name: SCOTTY FISHFINDER MOUNT
Item Number: NO. 269
Scotty No: 272 Fishfinder Swivel Post is available if you already have a mount installed or the Triple Mount. These mounts can be customized by attaching a larger plate to the top. The larger plate can then be used to mount many items.Item Name: SCOTTY FISHFINDER SWIVEL POST
Item Number: NO: 272
Flush Mount Rod Holder 30 degree angle with gimbal and closed end to keep the interior of your kayak dry. These are normally mounted using 1/4" stainless oval head machine screws and a stainless nylock nut. The mounting hardware is available separately as is the clear silicone adhesive sealer we recommend. Price is per pair. Please note: The Flush Mount Rod Holders CDE is now stocking have a closed bottom and do not require a cap.Item Name: FLUSH MOUNT ROD HOLDER
Item Number: RHFM-2
Superior quality gasket/cap for 30 degree flush mount rod holders. Unlike the usual foam gaskets this gasket and cap combination will last for many seasons. Injection molded for an accurate fit. Sold one each.
Item Name: Flush Mount Rod Holder Gasket and CapItem Number: FMRHGC-1 Price: $3.00
These 90 degree flush mount rod holders are great for storing your rods in a vertical position behind your seat. Or they can be used to store a other items such as folding anchors, Boga Grips, etc. You can also use your VisiPole all around light in one. Sold one each.
Item Name: Vertical Flush Mount Rod HolderItem Number: VFMRH-1 Price: $8.00